 |
 |
 |
|
| Technical Specifications |
| Standard |
| 718 Series |
|
| Measure Pressure |
(internal sensor) |
| Accuracy |
0.05% full scale |
| Functions |
zero, min/max, hold, damp |
| Note: |
Dry air, non-corrosives only |
| |
|
| 718 1G |
|
| Range: |
-1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa) |
| Resolution: |
0.0001 psi, 0.001 mbar, 0.0001 kPa |
| Over Pressure: |
5x Full Scale |
| Functions: |
Zero, Min, Max, Hold, Damp |
| |
|
| 718 30G |
|
| Range: |
-12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa) |
| Resolution: |
0.001 psi, 0.1 mbar, 0.01 kPa |
| Over Pressure: |
5x Full Scale |
| Functions: |
Zero, Min, Max, Hold, Damp |
| |
|
| 718 100G |
|
| Range: |
-12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa) |
| Resolution: |
0.01 psi, 0.1 mbar, 0.01 kPa |
| Over Pressure: |
2x Full Scale |
| Functions: |
Zero, Min, Max, Hold, Damp |
| |
|
| 718 300G |
|
| Range: |
-12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa ) |
| Resolution: |
0.01 psi, 1 mbar, 0.1 kPa |
| Over Pressure: |
375 PSI 25 bar |
| Functions: |
Zero, Min, Max, Hold, Damp | |
| Fluke 718 series via using 700 Series Pressure Modules |
| Range: |
29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs |
| Resolution: |
Per pressure module specs |
| Accuracy: |
To 0.025 % of full span, per pressure module specs |
| Functions: |
Zero, Min, Max, Hold, Damp |
|
Note: media compatibility per pressure module specs | |
| Fluke 718 series via built in pump |
| Range: |
-12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm |
| Loop Power: |
Range: 24 V dc |
|
Accuracy: +/- 10 % |
|
Note: Drive; 20 mA into 1000 Ù for battery > 6.8V; 700 Ù for battery 5.8 to 6.8 V |
| mA Measure: |
Range: 0 mA to 24 mA |
|
Resolution: 0.001 mA |
|
Accuracy: 0.015 % + 1 count | |
| General Specifications |
| Maximum voltage |
|
| Temperature |
|
| Operating Temperature |
|
| Relative Humidity |
|
95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C) | |
| Operating Altitude |
|
| Shock |
|
| Vibration |
|
Random, 2 g, 5 Hz – 500 Hz | |
| Safety |
|
CSA C22.2 No. 1010.1: 1992 | |
| EMC |
|
EN50082-1: 1992 and EN55022: 1994 Class B | |
| Size |
|
216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) | |
| Weight |
|
| Power, battery life |
|
9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 | |
| Battery Life |
|
4 to 20 hours typical, depending on functions used | |
| Warranty |
|
Three years (one year on pressure pump in Fluke 718) | |
| Display |
|
LCD, 5 digit pressure and current simultaneous | |
| Note |
|
For use with non-corrosive gasses | |
|
|
|
 |
|
 |
|
|
|
