Pim Test: Single port reflection measurement

Test Frequencies: 2 custom frequencies*

Carrier Power

Cellular +20 to +33 dBm, in 1dB steps

PCS +20 to +30 dBm, in 1dB steps

Power Accuracy: ±1 dB / carrier

Pim Measurements with 1W test frequency

Range: -80 to -153 dBc @ 850 MHz

(typical -155 dBc)

Accuracy: ±2 dB to -153 dBc @ 850 MHz

±3 dB to -155 dBc @ 850 MHz

VSWR 2 frequency test: 0 ~ 15 dB (Return Loss), ±3 dB

Display: LCD screen and LED bar

RF Calibration: Automatic with RF Power On

Internal Checks: All rails checked on power up.

Level Alarms: Selectable VSWR and

External Power: DC 10~16 V @ 3.5 Amps max

Battery Power: typically 1 hour (with RF carriers

continuously on @ +30 dBm

Weight: 17.6 lbs, 8 kg., nominal

Dimensions: 13.5 x 12.9 x 6.0 inches

343 x 327 x 152 mm

Enclosure: Waterproof, IP55 stored, lid

closed IP40 operating, lid open

Operating Temp: 0 - 45°C / 32 – 113°F, 85% RH

(non-condensing)

Storage Temp: -10 - 60°C, 14 - 140°F, 85% RH

(non-condensing)

*Manufactured to customer specific frequencies.

Pim 20 Passive Intermodulation (Pim) Test System

Two CW carrier frequencies between 800 MHz and 2200 MHz (to

be specified with PO),

-155dBc), carrier power 20 to 30 / 33 dBm*, VSWR measurement 0

to 15 dB, LCD Display, battery, 17.6lbs / 8 kg, Enclosure IP55 / IP40

(closed / open), includes power supply 90 - 240VAC (specify connector

type w/ PO), Test Cable N-N, 4m (13ft), Adapter, 7/16 to N, 12V Car

adapter, accessories pouch, user manual, quick start guide.