 |
 |
 |
|
| Measurable cable |
Twisted-pair cable
100ohm characteristic impedance, shielded and unshielded,
CAT 3, 4, 5, 5e and 6 |
| Compatible connectors |
RJ-45 plugs |
| WireMap check |
Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690
Detectable errors: open, short, reversed, transposed, split pairs and other miswiring |
| Cable length check |
Measurable lengths: 2 to 300 m, 6.6 to 984 ft
Measurement accuracy: ± 4% rdg. ± 1 m, ± 4% rdg. ± 3.3 ft
Display resolution: 0.1 m, 0.3ft |
| Direction check |
Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04 |
| Display |
128 x 64 dot matrix LCD (with backlight) |
| Functions |
Auto Backlight: pressing a button turns the backlight on (it turns off automatically after about 20 seconds)
Beeper: sounds when pressing buttons and when measurement results are displayed
Energy-Saving Mode: enter into energy-saving mode after measurement (and resume when the TEST button is pressed)
Auto Power Save: the 3665-20 turns off automatically about 10 minutes after the last button press
Battery Check: Battery indicator blinks when voltage falls below 2.4 V
Unit Switch: Select between meters or feet |
| Power supply |
Two AA-size (LR6) alkaline batteries 1.4VA Approx. 50 hours |
| Dimensions, mass |
Approx. 85 W x 130 H x 33 D mm, approx. 160 g |
| Accessories |
TERMINATOR 9690 (1)
CARRYING CASE(1) (Stores the HiTESTER 3665-20 and TERMINATORs 9690) | |
|
|
|
 |
|
 |
|
|
|
