 |
 |
 |
|
|
Frequency Stability |
Output will change less than 0.1% for 15 minutes after switching ON and it will change less than 0.2% for 24 Hours after switching ON. | |
Output Characteristics | |
Impedance |
50§Ù ¡¾2% | |
Level |
Variable control
From
0.1Vp-p (No Load)
0.05Vp-p (50§Ù Load)
To
20Vp-p (No Load) ¡¾1Vp-p
10Vp-p (50§Ù Load) ¡¾0.5Vp-p | |
Attenuation |
-20dB ¡¾2% | |
DC Offset |
Variable: ¡¾10V open circuit, ¡¾5V into 50§Ù | |
Sine Wave | |
Distortion |
Less than 2% (1Hz - 100kHz) | |
Harmonic Ratio |
<30dB, 100kHz to 4MHz | |
Frequency Response |
<0.1dB, upto 100kHz
<1dB, 100kHz to 4MHz | |
Triangular Wave | |
Symmetry |
50% (Positive Half) to 50% (Negative Half)
<2%, 1Hz to 100kHz | |
Ramp Wave | |
Frequency Range |
0.5Hz to 3.5MHz | |
Symmetry |
80% (Rise Wave) to 20% (Fall Wave)
<5%, 1Hz to 100kHz | |
Rising Wave linearity |
<2%, 1Hz to 100kHz | |
Square Wave | |
Symmetry |
50% (Positive Half) to 50% (Negative Half)
<2%, 1Hz to 100kHz | |
Rise Time |
<90nS, (20Vp-p, No Load) | |
Positive Pulse | |
Frequency Range |
0.5Hz to 3.5MHz | |
Symmetry |
20% to 80%,
<5%, 1Hz to 100kHz | |
Rise Time |
<90nS, (20Vp-p, No Load) | |
Negative Pulse | |
Frequency Range |
0.5Hz to 3.5MHz | |
Pulse Width |
15% of time period of the Set Frequency | |
Symmetry |
80% to 20%, <5%, 1Hz to 100kHz | |
Rise Time |
<90nS, (20Vp-p, No Load) | |
Synchronous Output | |
Impedance |
50§Ù ¡¾2% | |
Level (TTL) |
Approx. 3Vp-p fix amplitude | |
Level (CMOS) |
Adjustable 5V to 14.5Vp-p (¡¾0.5 Vp-p) | |
Rise Time (TTL) |
<60nS | |
Rise Time (CMOS) |
<90nS | |
VCF Input (model 4003A only) | |
Input Level |
0 to 10V | |
Input Frequency |
DC to 1kHz | |
Sweep Operation | |
Operating Mode |
Linear/ LOG | |
Sweep Rate |
5 sec to 25ms | |
Width |
1:1 to 1:100 | |
Sweep Synchronous Output | |
Output waveform |
Linear/ LOG ramp wave | |
Amplitude |
10Vp-p (No Load) +/- 0.8Vp-p | |
Frequency Counter (model 4003A only) | |
Display |
5 digit, Auto range | |
Display Unit |
Hz/ kHz auto range | |
Resolution |
0.01Hz (max.) | |
Accuracy |
<0.02% ¡¾1 digit | |
Temp coefficient |
<10PPM / ¡ÆC | |
External Counter (model 4003A only) | |
Max. Input Voltage |
<150mV rms | |
Input Frequency |
0.1Hz to 60MHz | |
Coupling |
HF - for more than 100kHz
LF - With 100kHz filter for less than 100kHz | |
Sensitivity |
<30mV rms (1MHz) | |
Power Source: 115V AC ¡¾10%, 50/60Hz, fuse 600mA or
230V AC ¡¾10%, 50/60Hz, fuse 300mA | |
Operating Environment | |
Temperature |
0 to 40¡ÆC | |
Humidity |
10% to 80% | |
Storage | |
Temperature |
-20¡ÆC to 70¡ÆC | |
Humidity |
0% to 90% | |
Dimensions (W x H x D): 11 x 3.6 x 11.9'' (275 x 90 x 300 mm) | |
Weight: 5.5 lbs. (2.5 Kg) | |
Accessories: Power Cord, User's Manual
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Descripcion
Generates Sine, Triangle & Square waveforms from 0.5Hz to 4MHz
20Vpp output into open circuit (10Vpp into 50 §Ùs)
TTL Output <30nS
Voltage Control Generator (VCG) input
100% DC offset
Variable amplitude output plus 20dB attenuator
|
|
|
|
|
|
|
|
|
